Dental X-Ray Sensor Device

Hygiene and Maintenance ▪ To avoid cross-contamination between patients during use, it is necessary to protect the Dental Digital Sensor with hygienic single-use protective sheaths. ▪ Do not pull on the cable when removing the used protective sheath. ▪ The cable can be cleaned with caution by using a disinfecting wipe. Hold the Dental Digital Sensor with one hand, and with the other hand, apply a disinfecting wipe from the side of the sensor along the first 20 cm / 8 inch of the cable without pulling on the cable; subsequently clean the remainder of the cable in segments of 20 – 30 cm / 8 – 12 inch with as little pinching of the cable as possible, the wipe should slide without applying force. ▪ Do not immerse the sensor unit in disinfectants or any other chemicals. ▪ Wipe the sensor unit and the Cable near the sensor unit with some cloth with 70% isopropyl alcohol to disinfect it. ▪ Excessive wiping may result in damage to the sensor unit or the Cable.…